stayer TH610 Manual De Instrucciones página 16

= Maximum drilling, steel
= Maximum drilling, stone
= Maximum drilling, wood
= Weight
L = Sound power level
WA
L = Sound pressure level
PA
= Vibration
The values given are valid for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For lower
voltage and models for specific countries, these values
can vary. Please observe the article number on the type
plate of your machine. The trade names of the individual
machines may vary.
Noise/Vibration Information
Sound and vibration values were measured in accordance
with EN 60745.
¡Wear hearing protection!
Sound pressure level, L
pA
Uncertainty K -------------------------------------------------3 dB
pA
Sound power level L ---------------------------------105 dB(A)
WA
Uncertainty KdB ----------------------------------------------------3
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Hammer drilling into concrete (handle)
Vibration emission value a = 13,7 m/s² h
Uncertainty K = 1,5 m/s²
Hammer drilling in concrete (additional handle)
Vibration emission value a
K uncertainty = 1,5 m/s
2
Drilling into metal (handle)
Vibration emission value a
Uncertainty K = 1,5 m/s²
Drilling in metal (additional handle)
Vibration emission value a
Imprecisión K = 1,5 m/s
2
Important!
El valor de las vibraciones cambia dependiendo del ámbito
de aplicación de la herramienta eléctrica, por lo que en
casos excepcionales puede superar al valor indicado.
----------------------------97,5 dB(A)
= 10,910 m/s
2
h
= 4,503 m/s²
h
= 5,372 m/s
2
h
ENGLISH
16
EU declaration of conformity
The undersigned:
STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 902 91 86 81
CERTIFIES
That the machine:
Type:
DRILLS / DRILLS / HAMMERS
Models:
TH610 / TH610A / TH710A / TH1000AK
We declare under our sole responsibility that this product
is
in conformity with the following standards or standardized
documents: EN 60745-1, EN 60745-2-1, EN 55014-1, EN
55014-2, EN 61000-3-2, EN 61000-3-3 according to EU
Regulations 2006/42/EC, 2019/30/EU.
16
January 2020
Ramiro de la Fuente
Managing Director