Electrical Diagrams; Installation With An External "1-Button" Module And A Monitor; Installation With An External "1-Button" Module And Two Monitors; Installation With An External "2-Button" Module And Two Monitors - SOMFY V SYSTEM PRO Manual De Instalación

The electrical diagram must be adapted to the installation to be implemented. For more complex installations than those
presented below, please consult the diagrams book available as a pdf.
Note: The external module can control an electric lock or a motorised gate. To control both, a relay module is required, ref.
9020031.

7.1 Installation with an external "1-button" module and a monitor

1
See diagram at the end of the document.

7.2 Installation with an external "1-button" module and two monitors

Bus line between the two monitors
2
See diagram at the end of the document.
Bus line distributed via the electric panel
3
See diagram at the end of the document.

7.3 Installation with an external "2-button" module and two monitors

4
See diagram at the end of the document.

7.4 Push button for a remote buzzer

It is possible to connect an independent push button enabling the buzzer on the monitors to ring with a different tune
from that used for calls from an external module.
Copyright © 2016 Somfy SAS. All rights reserved.

7 ELECTRICAL DIAGRAMS

9020027 9020027
0 0 230V 230V +BUS- +BUS-
N L
230 VAC
50 Hz
EN
11