Settings; Installing The Memory Card; Using The Different Buttons; Technical Data - SOMFY V SYSTEM PRO Manual De Instalación

EN
Bottom view
37 38 39 40
12
Buzzer level selector
Conversation
13
thumb-wheel
38
Brightness, contrast and screen
colour adjustment button.
It is possible to add an SD micro-card in the Premium io monitor in order to store more images and transfer them. This card
must be placed in support 35 (see illustration above).
See the user guide.
Power supply
Screen
Nominal current
Operating temperature
Frequency range and max power used for the radio control
12
8 MONITOR SETTINGS
Front panel
Perform a buzzer test, adjust the 3-position selector to the position that
suits the users.
volume setting Perform a communication test with the external module. Turn the
thumb-wheel until the voice of the person speaking can be heard clearly.
Press
This menu allows the user to set the date, time, brightness, colour and
contrast.
See the user guide for the description of the adjustment procedure.

9 INSTALLING THE MEMORY CARD

10 USING THE DIFFERENT BUTTONS

11 TECHNICAL DATA

12
13
36
to activate the screen and access the OSD menu.
Bus line
7'' - 800 x 480 mm
0.8 A
-10/+50°C
868.700 MHz - 869.200 MHz
p.a.r. <25 mW
Copyright © 2016 Somfy SAS. All rights reserved.
Back of the front panel
35