Configuration - ZUMEX Speed Serie Manual De Usuario

Speed Pro Cooler: Cooler Unit
Switch the cooler unit on by activating the switch on the left of the juice outlet. You can adjust
the juice temperature with the control situated on the right. Turn in clockwise direction for
colder juice and anti-clockwise direction for less cold juice.
Activate the tank lever to fill a glass or jug.
Important! Remember to switch off the Cooler unit (70) when you switch off the main
machine to avoid unnecessary consumption.

Configuration

Your Zumex Speed Pro or Speed S +plus juicer enables you to set parameters to your liking.
Use the electronic device to choose and program the operating mode of your machine. With it, you
can control attributes and functionalities following the MENUS enclosed.
To enter the MENU press the STOP and MODE buttons for at least 2 seconds and enter the
default PIN (0000). Then press OK button for at least 2 seconds to confirm the PIN.
After entering the menu, you can set:
LANGUAGE: You have a choice of 23 available languages.
PIN: See or change the current PIN so that nobody else can change the machine parameters.
COUNTER: See total or partial counter of the machine. Reset the partial counter, visible on
the main screen. To reset the machine counter, press STOP + START for 3 seconds until the
counter indicates 0000000.
Ascending or descending CREDIT: You can program the machine credit so the machine can
be stopped, in ascending order or descending order, until the machine has been programmed
again.
MODE LOCKING SYSTEM: You can get the machine to only work in Automatic or Professional
and even so the number of oranges or volume to be squeezed cannot be changed, so that it
only squeezes the quantity set by you.
MANUAL MODE (Help mode): Some machine models have an actuator or an auxiliary
operating sensor. This can be annulled by selecting the MANUAL mode. [Self Service Model:
SS Tap Up (44U), SS Tap S +plus (44+) and Cooler Model: Level detector (56)].
WASTE LIMIT: You can activate an alarm so that the machine will stop when the desired
number of oranges has been squeezed. Thus, you will know when the waste bin has to be
emptied.
PULPOUT SYSTEM: You can activate the Automatic PulpOut System for automatic pulp and
seed removal. You can choose between continuous and non-continuous modes.
Continuous mode, eliminates pulp whenever the machine is juicing. It means the system
runs automatically and therefore means that you can go longer between cleans.
Non-continuous mode, means a longer amount of time for the pulp to be filtered. You
can choose how often the system is activated depending on the type of fruit used and
the quantity of pulp created. Fast frequency will mean that the system is activated more
often.
The conveyor belt will run on the following settings:
SLOW REGULAR
20 oranges 15 oranges
What is more, you can activate the "Self cleaning" option which means that the belt will
be cleaned automatically after the last juicing. In non-continuous mode the "Self cleaning"
function will activate 30 seconds after the last use.
EN
FAST
10 oranges
59