Measuring Heights > 1.22 M - Seca 787 Serie Instrucciones De Uso Y Garantía

Measuring heights > 1.22 m
1. Determine the height value (➔ "Measuring heights < 1.22 m", page 29).
2. Press the key.
Height
The message and the last height value entered are displayed.
SEt
3. Use the  and 
Hold
4. Press the confirm key
The height value is displayed permanently.
When measuring heights > 1.22 m, the measuring result is recorded digitally
and shown in the display.
NOTE
During height measurement, the display on the display unit changes
as follows:
• The height value in the display changes as long as you are moving
the upper telescopic element.
• The height value flashes as soon as you stop moving the telescopic
element.
• After approx. 20 s, the height value stops flashing and
played. If the height value is to be displayed permanently, it is suffi-
cient to press the
1. Fold up the measuring flap until it engages in a horizontal position.
2. Extend the upper telescopic element until the patient can get under the
measuring flap comfortably.
3. Ask the patient to stand under the measuring flap:
– Upright posture
– Head straight (Frankfort horizontal plane, parallel to measuring flap)
4. Push the upper telescopic element down until the measuring flap is in
contact with the patient's head.
The height value flashes in the display.
5. Press the key.
Height
The height value and the
keys to enter the height value.
BMI
.
key.
Height
symbol are permanently displayed.
English
is dis-
- - - - -
Operation • 31