Publicidad
Idiomas disponibles
Idiomas disponibles
Using Your Radio
Operation
To Scan Privacy Codes:
Channel Button
1. While in Standby Mode, press the Channel Up
or Channel Down button to choose the main
channel you wish to scan.
2. Press the Mode button until the Scan icon and
Select Channel
the privacy code number flashes on the display.
3. Press the Channel Up or Channel Down button
and your radio will begin scanning privacy
codes within the main channel you selected.
Mode Button
4. The Scan icon will continue to be displayed
when scan is On. Your radio will continue to
scan privacy codes and stop as incoming
transmission is detected. Your radio will
remain on that channel and privacy code for
Scan Privacy Codes
ten (10) seconds. During this time, you can:
a. Press and hold the Talk button to
communicate with others. Your radio will
remain on that channel and privacy code
and return to Standby Mode.
b. Press the Channel Up or Channel Down
button to resume scanning privacy codes.
c. Press the Mode button to proceed to next
available Mode function.
If you press the Talk button while scanning
(see page 11 for further details) and not within
ten (10) seconds of receiving transmission,
you will transmit on the last channel you
transmitted or received on.
If you do not press any button within ten
(10) seconds, your radio will automatically
resume scanning privacy codes.
12 English
Introduction
Operation
VibrAlert
®
Mode Button
Your microTALK
incoming signals by sounding an audible
call tone, by vibrating silently, or both.
To Change Call Settings:
VibrAlert
®
+ Ring
1. Press the Mode button until the Call Setting
icon flashes on the LCD. The current setting
(Vibrate + Ring, Vibrate Only, or Ring Only)
is displayed.
VibrAlert
®
Only
2. Press the Channel Up or Channel Down
button to change the call setting.
3. a. Press the Mode button to enter the new
setting and proceed to other functions.
Ring Only
b. Press the Lock button to enter the new
setting and return to Standby Mode.
10 Call Tone Settings
Channel Button
You can choose between ten (10) different call
tone settings to transmit a unique call alert.
To Change a Call Tone Setting:
1. Press the Mode button until the letter "C"
and the current call tone number (1 through
Mode Button
10) is displayed. The current call tone will
sound for one (1) second.
2. Press the Channel Up or Channel Down
button to hear the other call tone settings.
Call Tone Setting
3. a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press the Lock button to enter the new
setting and return to Standby Mode.
Channel Button
Customer Assistance
Warranty
and Call Tones
®
radio can alert you to
Nothing comes close to a Cobra
™
•
•
13
Publicidad
