Replacement Parts And Wearing Parts; Technical Specifications - Beurer EM 49 Instrucciones De Uso

The battery symbol is shown. How to proceed:
Replace all batteries.
You have an unpleasant sensation at the electrodes. How to
proceed:
(1) The electrodes are not positioned correctly. Check their positions
and re-position, if necessary.
(2) The electrodes are worn. This may cause irritated skin as even
distribution of the current across the entire area is no longer
guaranteed. For this reason, replace the electrodes.
Skin in the treatment area turns red. How to proceed:
Immediately stop treatment and wait until your skin has returned to its
normal condition. If the redness is under the electrode and disappears
quickly, there is no risk – this is caused by the locally stimulated,
increased blood flow.
However, consult your doctor before you continue treatment if the
skin irritation persists and this is accompanied by an itchy sensation
or inflammation. This may be caused by an allergic reaction to the
adhesive surface.

13. Replacement parts and wearing parts

You can obtain the following replacement parts directly from
Customer Services:
Designation
8 x adhesive electrodes
(45 x 45 mm)
4 x adhesive electrodes
(50 x 100 mm)

14. Technical specifications

Name and model EM 49
Type EM 49
Output waveform Biphasic rectangular pulse
Pulse length 50 – 450 µs
Item number and/or order number
Item 661.02
Item 661.01
Pulse frequency
Output voltage
Output current
Voltage supply
Treatment time
Intensity
Operating conditions
Storage conditions
Dimensions
Weight
Use Altitude Limit
Use Range Atmospheric
Pressure
The serial number is located on the device or in the battery
compartment.
Note: If the device is not used acording to the instructions specified,
perfect functionality cannot be guaranteed!
We reserve the right to make technical changes to improve and
develop the product.
This device complies with European standards EN60601-1 and
EN60601-1-2 (In accordance with IEC 61000-4-2, IEC 61000-4-3,
IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 610004-8 and
IEC 610004-11) and is subject to special precautionary measures with
regard to electromagnetic compatibility. Please note that portable and
mobile HF communication systems may interfere with this unit.
More details can be requested from the stated Customer Services
address or found at the end of the instructions for use.
36
1 – 150 Hz
max. 100 Vpp (500 ohm)
max. 200 mApp (500 ohm)
3 x AAA batteries
Adjustable from 5 to 100 minutes
Adjustable from 0 to 50
5°C – 40°C (41°F – 104°F) at a relative
humidity of 15 – 93%
-25 °C –70 °C (-13 °F – 158 °F) at a
relative humidity of 0– 93%
132 x 63 x 29.5 mm (including belt clip)
83 g (including belt clip, without batteries),
117 g (including belt clip and batteries)
3000 m
700 - 1060 hPa