Freezer Door Bins; Freezer Shelf; Freezer Bin; Refrigerator Care - Sears Kenmore Elite 106.5177 Serie Manual De Uso Y Cuidado

Freezer Door Bins

(on some models)
To Remove and Replace the Bins:
1. Remove the bin by lifting it and pulling it straight out.
2. Replace the bin by sliding it in above the desired supports and
pushing it down until it stops.

Freezer Shelf

(number of shelves varies by model)
To Remove and Replace a Shelf:
1. Pull the shelf forward to the stop. Tilt the front of the shelf up and lift it
slightly as you pull the shelf from the frame.
2. Replace the shelf by guiding it back into the slots on the frame and
pushing the shelf in past the stop.

Freezer Bin

(on some models)
The freezer bin can be used to store bags of frozen fruits and vegetables
that may slide off freezer shelves.
To Remove and Replace the Freezer Bin:
1. Remove the bin by sliding it out to the stop. Lift the front to slide the
bin out the rest of the way.
2. Replace the bin by positioning it on the rails. Lift the bin front slightly
while pushing it in fully past the stops.

REFRIGERATOR CARE

Cleaning

WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Both the refrigerator and freezer sections defrost automatically. However,
clean both compartments about once a month to avoid buildup of odors.
Wipe up spills immediately.
To Clean Your Refrigerator:
1. Unplug refrigerator or disconnect power.
2. Remove all removable parts from inside, such as shelves, crispers, etc.
3. Hand wash, rinse, and dry removable parts and interior surfaces
thoroughly. Use a clean sponge or soft cloth and a mild detergent in
warm water.
Do not use abrasive or harsh cleaners such as window sprays,
scouring cleansers, flammable fluids, cleaning waxes,
concentrated detergents, bleaches or cleansers containing
petroleum products on plastic parts, interior and door liners or
gaskets. Do not use paper towels, scouring pads, or other harsh
cleaning tools. These can scratch or damage materials.
To help remove odors, you can wash interior walls with a mixture
of warm water and baking soda (2 tbs to 1 qt [26 g to 0.95 L] of
water).
4. Determine whether your refrigerator exterior is painted metal, Ultra
Satin™ (stainless look) finish, brushed aluminum or stainless steel, and
choose the appropriate cleaning method.
NOTE: Ultra Satin™ (stainless look) finish has a smooth, uniform color
with a glossy finish that resists fingerprints. Stainless steel has a distinct
grainy texture with variation in color that is natural to steel.
Painted metal: Wash exteriors with a clean sponge or soft cloth and a
mild detergent in warm water. Do not use abrasive or harsh cleaners,
or cleaners designed for stainless steel. Dry thoroughly with a soft
cloth. Additionally, to avoid damage to painted metal exteriors, apply
appliance wax (or auto paste wax) with a clean, soft cloth. Do not
wax plastic parts.
Brushed aluminum: Wash with a clean sponge or soft cloth and a mild
detergent in warm water. Do not use abrasive or harsh cleaners, or
cleaners designed for stainless steel. Dry thoroughly with a soft cloth.
Ultra Satin™ (stainless look) finish: Wash with a clean sponge or soft
cloth and a mild detergent in warm water. Do not use abrasive or
harsh cleaners or cleaners designed for stainless steel. Dry thoroughly
with a soft cloth.
Stainless steel finish: Wash with a clean sponge or soft cloth and a
mild detergent in warm water. Do not use abrasive or harsh cleaners.
Dry thoroughly with a soft cloth.
To keep your stainless steel refrigerator looking like new and to
remove minor scuffs or marks, it is suggested that you use the
manufacturer's approved Stainless Steel Cleaner and Polish. To
order the cleaner, see "Accessories."
IMPORTANT: This cleaner is for stainless steel parts only!
25