Alarm Time Setting - TFA 60.2025.01 Instrucciones De Uso

TFA_No. 60.2025_Anleitung 04.03.2019
Digital alarm clock with LED digits
• Connect the device to a suitable USB power source, such as a computer, or use a suitable power adapter (not
included).
• A beep tone is heard and 00:00 appears on the display.
7. Settings
• Press and hold the UP or DOWN button in setting mode for fast mode.
• The device will automatically quit the setting mode if no button is pressed for 10 seconds.
7.1 Time setting
• Press and hold the MODE button in normal mode for three seconds.
• The hour digit will be flashing. Press the UP or DOWN button to adjust the hours.
• Press the MODE button again and you can adjust the minutes and the 24 - or 12-hour system with the UP or
DOWN button.
• Confirm the setting with the MODE button.
8:25 Uhr Seite 14
– 26 –
Digital alarm clock with LED digits

7.2 Alarm time setting

• Press and hold the ALARM button in normal mode for three seconds.
• 6:00 (default) or the last adjusted alarm time appear on the display.
• AL and the hour digit start blinking. Press the UP or DOWN button to adjust the hours.
• Confirm the setting with the ALARM button.
• Set the minutes in the same way.
• Confirm the setting with the ALARM button.
• 5 (default) or the last adjusted snooze interval appears on the display.
• Press the UP or DOWN button to set the desired time duration (5 to 60 minutes).
• Confirm with the ALARM button.
• To activate and deactivate the alarm function press the ALARM button in normal mode.
• AL appears or disappears on the display.
• When the alarm is activated, the alarm starts to ring when the set alarm time is reached.
• Press any button (except SNZ/LIGHT) and the alarm will stop.
– 27 –