Alarm Time Setting - TFA 60.2016 Instrucciones De Uso

TFA_No. 60.2016_Anleitung
Alarm clock
Housing (Fig. 4)
J: Battery compartment
6. Getting started
• Open the battery compartment and insert three new AAA 1.5 V bat-
teries. Ensure the battery polarity is correct.
• The alarm starts to ring and the backlight will be activated briefly.
• Close the battery compartment again.
7. Operation
• The device will automatically quit the setting mode if no button is
pressed for 20 seconds.
• Press and hold the UP or DOWN button in the setting mode for fast
mode.
7.1 Clock and calendar setting
• Press and hold the SET button in normal mode.
• The year indication will be flashing and you can adjust the year with
the UP or DOWN button.
• Press the SET button again and the setting sequence is shown as
follows: Month and day, hours, minutes and 24 or 12 hours display
(PM appears on the display after 12 h) and adjust with the UP or
DOWN button.
18
26.04.2016 13:43 Uhr Seite 10
Alarm clock
• Confirm with the SET button.
• The display shows the current time.
7.2 Backlight and date
• Press the SNOOZE/LIGHT button at the top and the backlight will be
activated for 8 seconds.
• Press the SNOOZE/LIGHT button again.
• The date (month, day), the year and the weekday (MO, TU, WE, TH,
FR, SA or SU) appear briefly on the display.

7.3 Alarm time setting

Alarm 1:
• Press and hold the UP button.
• M-F, S-S flashes.
• Press the UP or DOWN button to choose between the three set
alarms below:
• Monday until Sunday (M-F, S-S appear on the display)
• Monday until Friday (M-F appear on the display)
• Saturday and Sunday (S-S appear on the display).
• Confirm the setting with the SET button.
• The hour display flashes.
• Press the UP or DOWN button to adjust the alarm time (hours).
• Press the SET button.
• Set minutes in the same way.
19