Teac AI-101DA Manual Del Usuario página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

A
USB input port
Use to input digital audio from a computer . Connect it to a computer's USB connector .
Use a commercially available USB cable for connection .
NOTE
Install the dedicated TEAC driver software on the computer before connecting the unit (page
22) .
B
Analog audio input jack (LINE)
Use this to input analog audio .
Use a stereo mini plug cable to connect the headphones jack of a portable music player or
other device to this unit here . When using a connected portable music player, you should also
adjust its volume . Be aware, however, that the sound could distort if you raise the volume of
the portable music player too much .
o Use a commercially-available cable that suits the device to make the connection .
C
OPT 1/OPT 2 digital audio input connectors
Use these to input digital audio . Connect to the digital audio output connectors of digital
audio output devices .
Use commercially-available optical digital (TOS) cables to make the connections .
o Sampling frequencies of up to 192 kHz are supported .
D
SUBWOOFER OUT jack
If you want to use a subwoofer, connect it to this terminal .
o Output level adjustments made using the front panel and remote volume controls are
linked .
E
Power cord connector (~IN)
Connect the supplied power cord here .
After all other connections are complete, connect the power cord's plug to a wall outlet .
V Do not use any power cord other than the one included with this unit. Use of other
power cords could result in fire or electric shock. Unplug the cord from the outlet
when not using the unit for a long time.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido