Sony CDX-C780R Manual De Instrucciones página 27

5
When you finish entering tracks, press
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Notes
• "*Wait*" appears in the display while the unit is
reading the data, or when a disc has not been
put into the unit.
• "*Mem Full*" appears in the display when you
try to enter more than 12 tracks into a
programme.
Playing the stored programme
Changing the disc order in the unit will not
affect programme memory play.
You can select:
•PGM 1 to play Programme 1.
•PGM 2 to play Programme 2.
•PGM 1+2 to play Programmes 1 and 2.
1
Press (SHIFT).
2
Press (4) (PLAY MODE) repeatedly until
"PGM" appears.
3
Press (5) (n) repeatedly until the
desired programme appears.
z PGM 1 z PGM 2
PGM off Z
Programme Play starts.
4
Press (SHIFT).
To go back to normal playback mode, select
"PGM off" in step 3 above.
Notes
• If you press a number button during programme
memory play, programme memory play is
interrupted, and playback of the selected disc
starts.
• "NO Data" appears in the display if no track is
stored in the programme.
• If a track stored into the programme memory is
not in the disc magazine, the track will be
skipped.
• When the disc magazine contains no tracks
stored into the programme memory, or when
the programme information has not been loaded
yet, "Not ready" appears.
Erasing an entire programme
1
2
3
z PGM 1+2
4
5
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC TRACK
PLAY MODE ENTER
"P 1" shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P 1" above.
Press (2) (N) repeatedly until "DEL"
appears.
PLAY MODE ENTER
To erase Programme 2, press (5) (n)
repeatedly until "PGM 2" appears.
Press (6) (ENTER) for two seconds.
PLAY MODE ENTER
The entire programme is erased.
When you finish erasing programmes,
press (4) (PLAY MODE) for two seconds.
Press (SHIFT).
EN
27