Battery Replacement; Troubleshooting - TFA 30.3060.01.IT Instrucciones De Uso

TFA_No. 30.3060_Anleitung 02.06.2015
KLIMA@HOME - Wireless thermo-hygrometer
10. Labeling the transmitter sites
• As soon as you have permanently installed the transmitters 1 to 3 at their desired location, you can
name the three displays on the basic station. The delivery includes a selection of two strips.
• Pull the strip in the middle of the display out of the slot. Label the strip with a suitable pen. Of
course it is also possible to make your own strip (e.g. made of laminated paper or cardstock). Insert
the strip into the slot.
11. Care and maintenance
• Clean the devices with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries if you do not use the devices for a long period of time.
• Keep the devices in a dry place.

11.1 Battery replacement

• When the battery symbol appears in the display line of a channel, please change the batteries in
the respective transmitter.
• When the battery symbol appears in the display line of indoor values, please change the batteries
in the basic station.
• Please note:
When the batteries are changed, the contact between transmitter and basic station must be
restored – so always insert new batteries into both units or start a manual transmitter search.

12. Troubleshooting

Problems Solution
➜ Ensure that the batteries polarity are correct
No indication at the
➜ Change the batteries
basic station/transmitter
➜ In the setting mode activate the DCF reception
No DCF reception
➜ Wait for attempted reception during the night
➜ Choose another place for your product
➜ Manual setting of the clock
➜ Check if there is any source of interference
➜ Restart the basic station according to the manual
No transmitter reception ➜ No transmitter installed
➜ Check batteries of transmitter (do not use rechargeable batteries!)
Display "---"
➜ Restart the transmitter and the basic station according to the manual
➜ Manual search for the transmitter according to the manual
➜ Choose another place for the transmitter and/or the basic station
➜ Reduce the distance between the transmitter and the basic station
➜ Check if there is any source of interference
Incorrect indication Change the batteries
If your device fails to work despite these measures contact the supplier from whom you purchased it.
18
16:58 Uhr Seite 10
KLIMA@HOME - Wireless thermo-hygrometer
13. Waste disposal
This product has been manufactured using high-grade materials and components which can be re-
cycled and reused.
Never dispose of empty batteries and rechargeable batteries in household waste. As a
consumer, you are legally required to take them to your retail store or to an appropriate
collection site depending on national or local regulations in order to protect the envi-
ronment.
The symbols for the heavy metals contained are: Cd=cadmium, Hg = mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical and Electronic
Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The user is obligated to
take end-of-life devices to a designated collection point for the disposal of electrical and
electronic equipment, in order to ensure environmentally-compatible disposal.
14. Specifications
Measuring range
Temperature indoor -10 °C... +60°C (+14 °F ...+140 °F)
Humidity indoor 1% to 99%
Measuring period every 16 seconds
Temperature transmitter -40 °C... +60 °C (-40 °F ...+140 °F)
Accuracy temperature ±1°C
Resolution temperature 0.1°C
Humidity transmitter 1% to 99%
Accuracy humidity ±3% rH (@ 35 ... 75% rH)
Resolution humidity 1 %
Display OFL Temperature is outside measuring range
Display OF Humidity is outside measuring range
Transmission range max. 100 m (free field)
Transmission frequency 868 MHz
Transmission time every 10 seconds
Power consumption Basic station: 3 x 1,5 V AA (batteries not included)
3 transmitter: 2 x 1,5 V AA each (batteries not included)
Basic station
Dimensions 128 x 32 (58) x 128 mm
Weight 217 g (instrument only)
19