Sat Radio Receiver (Optional); Receiving Channels With The Sat Receiver (Optional); Tuning In To Categorized Programs; Changing The Display - Alpine IVA-W205 Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAT Radio Receiver
(Optional)
SAT Receiver: XM or SIRIUS Receiver
When an optional XM or SIRIUS Receiver Box is connected
via the Ai-NET bus, the following operations may be
performed. However, the XM Receiver and SIRIUS Receiver
cannot be connected at the same time.
Receiving Channels with the SAT
Receiver (Optional)
About SAT Radio
Satellite Radio* is the next generation of audio entertainment, with over
to 100 digital channels. For a small monthly fee, subscribers can hear
crystal-clear music, sports, news and talk, coast-to-coast via satellite.
For more information, visit XM's website at www.xmradio.com., and
SIRIUS' website at www.sirius.com.
To receive SAT Radio, the separately sold XMDirect™ or SIRIUS
Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will
be required. For details, consult you nearest ALPINE dealer.
* XM and its corresponding logos are trademarks of XM Satellite
Radio Inc.
* SIRIUS and its corresponding logos are trademarks of SIRIUS
Satellite Radio Inc.
• The SAT Receiver controls on the IVA-W205 are operative only when
a SAT Receiver is connected.
1
Touch [SOURCE] on the main source screen.
The source selection screen is displayed.
2
Touch [XM] or [SIRIUS].
The XM or SIRIUS main screen display appears.
3
Touch [BAND] to select the desired band.
XM radio:
XM-1
XM-2
XM-3
SIRIUS radio:
SIRIUS-1
SIRIUS-2
4
Touch [NO./NAME] to select the channel number
tuning.
Each time it is pressed, the tuning mode is changed.
channel number tuning
5
Touch [
NO.] / [NO.
[NAME
] to select the desired channel. Touching
and holding either button will change channels
continuously.
• To customers when connecting the SIRIUS Tuner Box:
For detailed functions, refer to the SIRIUS Tuner Box installation
manual.
• For SIRIUS Setup Operation, refer to page 41.
52
-EN
XM-1
SIRIUS-3
SIRIUS-1
channel name tuning
] or [
NAME] /

Tuning in to Categorized Programs

You can listen to programs categorized to the same group one after
another.
1
Touch and hold [
CAT] or [CAT
seconds in the XM or SIRIUS mode.
The category mode is activated.
2
Touch [
CAT] or [CAT
category.
The first channel of the selected category is tuned.
3
Touch and hold [
CAT] or [CAT
seconds to turn off the category mode, or if no
operation is performed for 13 seconds, the category
mode will be automatically canceled.
• If the desired category program is not found, the selected category is
displayed for 5 seconds, then the receiving program is restored.

Changing the Display

Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or SIRIUS channel. The
unit can display this text information as explained below.
Touch [INFO.] on the XM or SIRIUS mode main screen.
Each time you touch this button, the display changes as shown
below.
In XM mode:
1
*
If the number of Auxiliary Data Field characters is more than 175,
touch [INFO] to continue the display.
In SIRIUS mode:
2
*
Channel name, category, artist and song name are displayed in one
screen.
3
*
Displayed when there is a composer name (text information).
] for at least 2
] to select a desired
] for at least 2

Publicidad

Tabla de contenido
loading

Tabla de contenido