Sat Radio Receiver Operation (Optional); Receiving Channels With The Sat Radio Receiver (Optional) - Alpine CVA-1014 Manual Del Usuario

SAT Radio Receiver Operation (Optional)

SOURCE/
POWER
BAND/TEL.
g g g f f f
g g f f
Example of XM mode Screen
Selected Source
Category Name
Preset button
number for
the stored
station
The current
Volume Level
setting status
SAT Receiver: XM or SIRIUS Receiver
When an optional XM or SIRIUS
Receiver Box is connected via the Ai-
NET bus, the following operations
may be performed. However, the XM
Receiver and SIRIUS Receiver
cannot be connected at the same
time.
All manuals and user guides at all-guides.com
Receiving Channels with the SAT
Radio Receiver (Optional)
Channel
Name
Channel
Number
1
Current Time
2
3
About SAT Radio:
Satellite Radio* is the next generation of audio
entertainment, with over to 100 digital audio
channels. For a small monthly fee, subscribers
can hear crystal-clear music, sports, news and
talk, coast-to-coast via satellite. For more
information, visit XM's website at
www.xmradio.com., or SIRIUS' website at
www.sirius.com.
To receive SAT Radio, the separately sold XM
Direct TM
or SIRIUS Satellite Radio Tuner and an
appropriate AI-NET Interface Adapter will be
required. For details, consult you nearest ALPINE
dealer.
* XM and its corresponding logos are trademarks of
XM Satellite Radio Inc.
* SIRIUS and its corresponding logos are trademarks
of SIRIUS Satellite Radio Inc.
NOTE
The SAT Receiver controls on the CVA-1014 are operative
only when a SAT Receiver is connected.
Press SOURCE/POWER to select XM or SIRIUS
mode.
Press BAND/TEL. to select the desired band.
Each press changes the band:
XM mode:
→ XM1 → XM2 → XM3
SIRIUS mode:
→ SIRIUS-1 (S1) → SIRIUS-2 (S2)
SIRIUS-3 (S3) ←
Press g or f to select the desired channel.
Holding g or f will change channels
continuously.
11
-EN