Installation requirements
Recommended locations for gas piping and electrical outlets
(For model NX58*9420S*)
17 in x 9 in
(43.2 cm x 22.9 cm)
Gas Wall Area
Recommended area
for through-the-wall
and through-the-floor
connection of gas pipe
stub and shut-off valve.
CAUTION
You must use the rear filler kit to install the range in a freestanding cutout cabinet.
For more information, see "Optional rear filler kit" as shown below.
16 English
Install_NX58M9420SS_DG68-00906A-03_EN+MES+CFR.indb 16
Optional rear filler kit
Used to fill gap between the range back and wall. Adds a filler strip to the rear of
the range. This kit can only be used when the opening in the countertop is 25" deep.
Recommended
If the countertop depth is greater than 25", there will be a gap between the filler
position
kit and the back wall.
12 in
(30.5 cm)
Recommended area
for 120V electrical
outlet on rear wall
To avoid breakage
WARNING
NOTE
CAUTION
Please DO NOT push the unit strongly when
you install. These actions can cause the
damage to the unit.
Please DO NOT push the burner knobs when
installing the range.
(Grasp the L/R door area to push the unit.)
10/24/2018 12:51:38 PM