IMPORTANT SAFETY INFORMATION
Inspect and verify the maximum
load-bearing capacity or maximum
strength of all structural supports,
pulling system components and
anchoring systems before setting
up the puller. Any component that
cannot withstand the maximum
cable-pulling forces may break and
strike nearby personnel with suffi-
cient force to cause severe injury
or death.
Do not allow anything other than the
pulling rope to contact the capstan.
A grip, swivel, or other component
could break and strike operator with
great force.
Failure to observe this warning can
result in severe injury or death.
Do not stand directly under a vertical
pull. Cable could fall suddenly from
the conduit.
Failure to observe this warning can
result in severe injury or death.
Greenlee / A Textron Company
Ultra Tugger
®
Cable Puller and Pulling Packages
5
Locate the puller so that it is close to the conduit.
Rope, cable, or connectors can break under
tension, causing the rope to whip violently.
Failure to observe this warning can result in severe
injury or death.
An under-rated or worn rope may break and whip
violently. Use a double-braided composite rope
with the following characteristics:
• Maximum Rated Capacity:
at least 22.3 kN (5000 lbs)
• Average Breaking Strength:
at least 90 kN (20,000 lbs)
Failure to observe this warning can result in severe
injury or death.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070