Description; Purpose - Textron Greenlee Ultra Tugger 15000-22 Manual De Instrucciones

Description

The Greenlee Ultra Tugger
to be used to pull cable through conduit and in tray.
The Ultra Tugger will develop 22.3 kilo-Newtons
(5000 lbs) of pulling force. See a Greenlee catalog for
sheaves, pulling rope, and other cable pulling
accessories to create an entire cable pulling system.
No single manual can provide instructions for every
possible cable pulling application; this manual contains
general information necessary to accomplish cable pulls
of many different setups.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tools provide information for
avoiding hazards and unsafe practices related to use of
this tool. Observe all of the safety information provided.
Do not operate this tool unless fully trained to do so,
or under trained supervision.
Greenlee / A Textron Company
Ultra Tugger
®
cable puller is intended
KEEP THIS MANUAL
® Cable Puller and Pulling Packages
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
Greenlee 15000-22 and 6500-22 series Ultra Tugger
cable pullers.
Keep this manual available to all personnel.
Replacement manuals are available upon request at
no charge.
Other Publications
Service Manual: 52020540
All specifications are nominal and may change as design improve-
ments occur. Greenlee Textron Inc. shall not be liable for damages
resulting from misapplication or misuse of its products.
Ultra Tugger is a registered trademark of Greenlee Textron Inc.
Versi-Boom is a trademark of Greenlee Textron Inc.
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070