en-us
Switching the Appliance On
Switch the appliance On with the POWER Button.
The appliance begins to cool. Light turns on when
the door is open.
The factory has recommended the following
temperatures:
Refrigerator Compartment: +37 °F (3 °C)
■
Freezer Compartment: 0 °F (-18 °C)
■
,
CAUTION:
Keep hands and fingers away from front and rear
openings of the refrigerator door when closing.
Risk of injury to hands or fingers.
Never allow children to climb on or play with
the refrigerator door.
Operating Tips
The appliance features a mullion which is fitted
to the left door.
The door of the Refrigerator Compartment can be
opened without having to first open the right door.
A heating element is integrated into the mullion in order
to avoid condensation. This can be switched On and
Off (see chapter "Special Functions", section "Door Rail
Heater").
,
CAUTION:
To prevent damage to the appliance
or the furniture fronts, fold the mullion when
closing the door.
10
Setting the Language
The Display Languages can be changed according
to the table in the chapter "Special Functions", section
"Setup Mode".
To change the Display Language:
1. Press the SETUP Button.
2. Press the ¾ or ¿ Selection Button, until the set
language is displayed.
3. Press the @ or A Setting Button, until the desired
language is displayed.
4. Press the SETUP Button, in order to store
the settings.
The set temperature is displayed again on the
Display Panel.
Setting the Temperature Unit
The temperature can be displayed in degrees
Celsius (°C) or degrees Fahrenheit (°F).
1. Press the SETUP Button.
The first menu (Temperature Unit) is displayed.
2. Press the @ or A Setting Button in order to switch
between degrees Fahrenheit (°F) and degrees
Celsius (°C).
3. Press the SETUP Button, in order to store
the settings.
The set temperature is displayed again on the
Display Panel.
Setting the temperature
Refrigerator Compartment
(can be selected from +35 °F (2 °C) to +46 °F (8 °C))
We recommend a setting of +37 °F (3 °C).
Perishable food should not be stored above +37 °F.
1. Activate the Setup Mode with the Selection Button ¿.
The symbol
is displayed.
¹
2. Set the temperature with the @ (warmer) or A
(cooler) Setting Buttons.
Freezer Compartment
(can be selected from +7 °F (-14 °C) to –9 °F (-23 °C))
We recommend a setting of 0 °F (-18 °C).
1. Activate Setup Mode with the Selection Button ¾.
The symbol ¸ is displayed.
2. Set the temperature with the @ (warmer) or A
(cooler) Setting Buttons.