Technical Specifications - Velleman CAMCOLVC7 Manual Del Usuario

7.
Update system time
• Create a text file named time.txt.
• In that text file, enter the date and time in the following format:
(YYYY=year, MM= month, DD= date, hh=hour, mm=minutes, ss= seconds)
e.g.: 2009.11.18 13:43:00
• Plug the CAMCOLVC7 into the USB port of your PC.
• Copy time.txt to the root directory of the CAMCOLVC7.
• Shut the USB device down in a proper way and unplug it from the USB port.
• Switch the CAMCOLVC7 off and on again. At this point, date and time as specified in
the time.txt file are loaded into the system memory and the file itself is removed from
the directory.
8.
LEDs
picture recorder
status LED [F]
power LED [G]
video recorder
status LED [H]
9.
Batteries
• This recorder contains an internal rechargeable battery. When the device is end-of-life,
this battery has to be removed.
• To do this, remove the 4 screws (red, see figure below) and the cover.
• Cut off the battery leads and dispose of the battery in accordance with local
regulations.
WARNING:
Never dispose of batteries in fire, as they could explode.
Keep batteries away from children.
10.

Technical Specifications

pick-up element
video resolution
picture resolution
19/07/2010
CAMCOLVC7
YYYY.MM.DD hh:mm:ss
on, red picture/sound recorder ready
shortly off picture taken
blinking sound is being recorded
off picture/sound recorder powered off
off recorder powered off
on, green recorder powered on
on, blue video recorder ready
blinking recording video
off video recorder off
colour CMOS sensor
720 x 480 pixels
1600 x 1200 pixels
5
Rev.02
©Velleman nv