Controlling The Audio Device - Avrcp - Sony DRC-BT30 Manual De Instrucciones

To adjust the volume
Push the jog switch up or down while
listening to music to adjust the
volume.
Tips
 Depending on the connected device, it
may be necessary to adjust the volume on
the connected device as well.
 Volume for calling and listening to music
can be adjusted independently. Even if you
change the volume while calling, the
volume for music playback does not
change.
To stop use
1
Terminate the Bluetooth
connection by operating the
Bluetooth device.

Press and hold the POWER
button for about  seconds.
The indicator (blue) lights up, and
the unit turns off.
Tip
When you finish playing music, the
Bluetooth connection may terminate
automatically, depending on the Bluetooth
device.
Controlling the audio
device – AVRCP
If the Bluetooth audio device
connected with this unit supports
AVRCP (Audio Video Remote
Control Profile), you can control by
using the unit buttons.
Refer to the operating instructions
supplied with the Bluetooth device on
how to operate it.
Note
Operation of the Bluetooth connecting
device by this unit will vary depending on its
specification.
Status: In stop or pause mode
Short Press
 
/ 
 Starts playback*
 Stop
 Skip to next/previous
 Fast-forward/Fast-rewind*
Status: In play mode
Short Press
 
/ 
 Pause*
1
 Stop
 Skip to next/previous
 Fast-forward/Fast-rewind*
* You may need to press the button twice
1
depending on the Bluetooth device.
Some Bluetooth devices may not operate.
*
2
Long Press


1
2
Long Press


2
Continued
15
US