Sony MDX-C8900R Manual De Instrucciones página 16

Changing the display item
Each time you press (AF/TA), the item changes
as follows:
" AF on
* Select this to turn on both the AF and TA
functions.
Notes
• "NO AF" and the station name flash alternately,
if the unit cannot find an alternative station in
the network.
• If the station name starts flashing after selecting
a station with the AF function on, this indicates
that no alternative frequency is available. Push
the SEEK/AMS control up or down while the
station name is flashing (within eight seconds).
The unit starts searching for another frequency
with the same PI (Programme Identification) data
("PI seek" appears and no sound is heard). If the
unit cannot find another frequency, "NO PI"
appears, and the unit returns to the originally
selected frequency.
Listening to a regional programme
EN
The "REG on" (regional on) function lets you
stay tuned to a regional programme without
being switched to another regional station.
(Note that you must turn the AF function on.)
The unit is factory preset to "REG on," but if
you want to turn off the function, do the
following.
1
Press (SHIFT), then press (4) (PLAY
MODE) repeatedly until "REG" appears.
2
Press (5) (n) repeatedly until "REG off"
appears.
3
Press (SHIFT).
Note that selecting "REG off" might cause
the unit to switch to another regional
station within the same network.
To return to regional on, select "REG on" in
step 2 above.
Note
This function does not work in the United
Kingdom and in some other areas.
16
" TA on " AF TA on*
AF TA off "
Local link function (United
Kingdom only)
The Local Link function lets you select other
local stations in the area, even if they are not
stored on your number buttons.
1
Press a number button that has a local
station stored on it.
2
Within five seconds, press the number
button of the local station again.
3
Repeat this procedure until the desired
local station is received.