Sony MDX-C8900R Manual De Instrucciones página 31

4
Press (SHIFT).
To return to normal playback mode, select
"PGM off" in step 3 above.
Notes
• If you press a number button during programme
memory play, programme memory play is
interrupted, and playback of the selected disc
starts.
• "NO Data" appears in the display if no track is
stored in the programme.
• If a track stored into the programme memory is
not in the disc magazine, the track will be
skipped.
• When the disc magazine contains no tracks
stored into the programme memory, or when
the programme information has not been loaded
yet, "Not ready" appears.
Erasing an entire programme
1
Press (SHIFT), then press
MODE) for two seconds.
DISC TRACK
PLAY MODE ENTER
"P 1" indicates Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P 1" above.
2
Press (2) ( N) repeatedly until "DEL"
appears.
PLAY MODE ENTER
To erase Programme 2, press (5) (n)
repeatedly until "PGM 2" appears.
3
Press (6) (ENTER) for two seconds.
PLAY MODE ENTER
The entire programme is erased.
4
When you finish erasing programmes,
press (4) (PLAY MODE) for two seconds.
5
Press (SHIFT).
(4) (PLAY
Adding tracks to a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC TRACK
PLAY MODE ENTER
"P 1" indicates Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P 1" above.
To select Programme 2, press (5) (n)
repeatedly until "P 2" appears.
2
Press (2) ( N) or (5) ( n) to select the
track slot number where you want to
insert a track.
Track slot number
DISC TRACK
PLAY MODE ENTER
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
4
Press (6) (ENTER) momentarily to enter
the track.
The current track is inserted in that slot
number and the succeeding tracks shift
down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, "*Mem
Full*" appears in the display, and you cannot
insert more tracks.
5
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).
EN
31