3
Select a "V Drive" box for registration by
adjusting the SEEK/AMS control either
on the unit or the rotary commander.
VOICE
Tip
If you select an already registered box number, the
registered source will be played or tuned in to.
Registering a vocal phrase
1
Once all the steps of "Selecting a
"V Drive" box for registration" are
completed, press (TALK) on the rotary
commander .
2
After you hear the unit's vocalized
instruction "Please speak now.",
EN
pronounce a desired phrase toward the
supplied microphone.
Please
speak
now.
3
After the vocalized instruction "Please
repeat.", pronounce the same phrase
again.
Please
repeat.
22
4
After another vocalized instruction
"Please repeat.", pronounce the same
phrase one more time.
Please
repeat.
The unit records the vocal phrase in this step
in order to identify the registered phrase later.
When the unit answers "OK!", the registration
is completed.
Notes
• Do not attempt to register while driving, as this
may create a traffic hazard.
• Be sure to reply after the unit's vocalized
instruction.
• When a beep sound is heard, the registration
failed. In this case, repeat the same process
starting from step 1.
• Do not use phrases of similar pronunciation such
as "Sony POPS 1" and "Sony POPS 2", because
the unit may not be able to distinguish the
difference.
• After you hear the unit's vocalized instruction,
reply within three seconds.
Tips
• When you register the phrases, pronounce them
clearly and loudly to make it easier for the unit
to recognize them.
• Registration should be made while the car is
parked with the engine running so that the unit
will recognize your voice more easily when you
are driving.
• Though the vocalized instructions are in English,
any language can be used for registration.
• The volume of the vocalized instructions can be
adjusted on the unit or by the rotary
commander.