Slave Units; Master Unit - NEO PROTON 7 USB Manual De Usuario

MASTER/SLAVE OPERATION (via UFI
wi- transceiver)
PROTON 7 USB units can operate in Master/Slave mode
wirelessly using the optional UFI wi- transceiver. The
master UFI-enabled unit can be operated in stand-alone
mode, with the UFI set to transmit. The slave units should
all be set to slave mode, with the UFI set to receive.
Note: Slave units should be configured before configuring

master unit

Note: All units should be set to same DMX address, mode
and UFI channel

SLAVE UNITS:

•
Press MENU button until 3-CH or 8-CH is dis
played. Press ENTER
•
Set DMX address to d 1
•
Set UFI to preferred receiving channel (1-16)
•
Attach UFI to the PROTON 7 USB'S port.
MASTER UNIT:
•
Press MENU button until DMX mode is displayed
that matches slave con guration Press ENTER
•
Set DMX address to d 1
•
Set to Auto or Sound-Active mode
•
Set UFI to chosen transmitting channel (1-16)
•
Attach UFI to the PROTON 7 USB port
OPERATING MODE PRIORITY RANK
Higher priority control modes override lower priority
modes
1. UFI
2. DMX (wired)
3. Infrared (IR6 remote)
4. Manual (onboard menu)
P. 17
PROTON 7 USB
ENGLISH VERSION