Sound Mode - NEO PROTON 7 USB Manual De Usuario

Auto Show
The fixture has a built in automatic program. To access this,
please see the below instructions:
• Press the button MENU so many times until the
display shows P--, then press the button ENTER.
• Press the button UP/DOWN to switch between
programs P1-P4.
•Press the button MENU several times until S-- ap-
pears on the display.
• Use the button UP/DOWN to select the auto
programs speed S001 - S100 (slow-fast).
• Press the button ENTER save the setting.

Sound mode

In music mode, via its integrated microphone, the unit can
be controlled by music with a clear rhythm in the bass range.
If the music control should not work optimally, increase the
volume or reduce the distance between the sound source
and the light effect unit.
• Press the button MENU so many times until the
display shows Snd.
• Using UP/DOWN button, select one of the
modes Snd1 or Snd2. Press ENTER
• You can set the microphone sensitivity pressing
the button MENU so many times until the display
show Sens.
• Using the button UP/DOWN, select the desired
value sensitivity (slow-fast) u0-u100.Press ENTER
Static Color
The fixture has the ability to accept custom static color set-
tings. Access these chases via the control panel on the back
of the fixture.
• Press the button MENU so many times until the
display shows C.., then press ENTER.
• Using UP/DOWN button, select one of the pro-
grams C1 - C7.
P. 9
PROTON 7 USB
ENGLISH VERSION