NEO PROTON 7 USB Manual De Usuario página 6

4. INTRODUCTION
MOUNTING
PROTON 7 USB may be set up on a solid and even surface.
The unit can also be mounted upside down to a cross arm.
For fixing, stable mounting clips are required. The mounting
place must be of sufficient stability and be able to support a
weight of 10 times of the unit's weight.
When carrying out any installation, always comply scrupulous-
ly with all the regulations (particularly regarding safety) cur-
rently in force in the country in which the fixture's being used.
• Install the projector at a suitable location by means of the
mounting bracket (1).
P. 6
PROTON 7 USB
ENGLISH VERSION
• Always additionally secure the projector with the safety
rope from falling down. For this purpose, fasten the safety
rope at a suitable position so that the maximum fall of the
projector will be 20 cm.
• Adjust the projector and use the knob (2) to slightly re-
lease or tighten the locking mechanism of the bracket if is
necessary.