Maintenance And Care; Troubleshooting - schulink SC1344 Manual Del Usuario

16. MAINTENANCE AND CARE

A minimal amount of care can keep your battery charger working properly for years.
• Clean the clamps each time you are finished charging. Wipe off any battery fluid
that may have come in contact with the clamps, to prevent corrosion.
• Occasionally cleaning the case of the charger with a soft cloth will keep the finish
shiny and help prevent corrosion.
• Coil the input and output cords neatly when storing the charger. This will help
prevent accidental damage to the cords and charger.
• Store the charger unplugged from the AC power outlet.
• Store inside, in a cool, dry place. Do not store the clamps clipped together, on or
around metal, or clipped to the cables.

17. TROUBLESHOOTING

PROBLEM
The charger's blue
CONNECTED LED is
not lit.
The charger will not turn on
when properly connected.
I cannot select a 6V or 12V
setting.
The display scrolls
"CONNECT BATTERY".
POSSIBLE CAUSE
The charger is not
connected to a wireless
network.
AC outlet is dead.
Poor electrical connection.
The charger is equipped
with Auto Voltage Detection,
which automatically detects
the voltage and charges the
battery.
The clamps are not making a
good connection.
The fuse is bad.
• 16 •
SOLUTION
See Section 12.
Check for open fuse or circuit
breaker supplying AC outlet.
Check power cord and
extension cord for loose
fitting plug.
No problem; this is normal.
Check for poor connection
at battery and frame.
Replace the in-line fuse for
the ring connector or 12V
accessory plug connector.