Before Returning For Repairs; Replacement Parts - schulink SC1344 Manual Del Usuario

PROBLEM
Charging a 12V battery,
but the display shows
"CHARGING 6V".
Red LED is solid and
the display scrolls
"CHARGE ABORTED-BAD
BATTERY".

18. BEFORE RETURNING FOR REPAIRS

For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485. DO NOT
SHIP UNIT until you receive a RETURN MERCHANDISE AUTHORIZATION (RMA)
number from Customer Service at Schumacher Electric Corporation.
19. SPECIFICATIONS
Input Voltage ................................................................120V AC @ 60Hz, 0.91A
Output Voltage .......................................6V or 12V, with Auto Voltage Detection
Output Current Rating ..........................................................2A @ 6V; 3A @12V

20. REPLACEMENT PARTS

Battery clamps (quick-connect) ..................................................... 3899002636Z
Ring connectors (quick-connect) .................................................. 2299002042Z
12V accessory plug (quick-connect) ............................................. 3899001401Z
POSSIBLE CAUSE
Battery may be extremely
discharged.
The battery is bad.
The battery is too large for
the charger.
For information about troubleshooting,
contact customer service for assistance:
services@schumacherelectric.com
www.batterychargers.com
or call 1-800-621-5485
• 17 •
SOLUTION
No problem; the charger
will eventually recognize
battery as 12V and charge
completely.
Disconnect charger from the
AC outlet and then remove
the clamps. Do not continue
to try to charge the battery.
Have the battery checked or
replaced.
You need a charger with a
higher amp rate.