Installing The App And Registering Your Charger; Using The App To Control The Charger - schulink SC1344 Manual Del Usuario

12. INSTALLING THE APP AND REGISTERING YOUR CHARGER

• Before you begin, have your charger ID card on hand.
• Download and install the SchuLink+
NOTE: For Apple devices, requires iOS 9.0 or later; Android devices, OS 5.0 or later.
SETTING UP THE CHARGER'S CONNECTION TO A WIRELESS NETWORK
1. Open the App on your mobile device.
2. Press the
3. Tap the three short horizontal bars
4. Choose SETUP.
5. Swipe screens and follow directions for setup to a wireless network.
REGISTERING A CHARGER
When using the App for the first time with a new charger, you must register your
charger(s) to the App.
1. Open the App on your mobile device.
2. Press the
3. Tap the three short horizontal bars
up a menu.
4. Choose ADD CHARGER.
5. Enter the Charger ID number and password
(SC20xxxxx-yy) located on the Charger ID card
included with the unit. This information is also
found on a label on the side of the charger.
6. Swipe screens and follow directions to finish
charger registration.

13. USING THE APP TO CONTROL THE CHARGER

1. Connect your charger, following the precautions listed in Sections 6 and 7.
2. Plug the charger into a live grounded 120V AC outlet. The blue
CONNECTED LED on the charger will turn solid. If the blue LED is not lit,
refer to Troubleshooting.
3. Open the SchuLink+
4. Log in, using the email address and password that you provided when you
registered. If you forget your password, select Forgot Password.
Home icon.
Home icon.
App.
App (Apple store or Google Play).
to bring up a menu.
to bring
• 8 •