ATTENTION:
Do not overtighten the friction regulator. If there is too much resistance, it may be difficult to
move the throttle lever, which could result in an accident.
7 STOPPING THE ENGINE
NOTE:
Before switching off the outboard, allow it to cool for a few minutes at low speed or at low
speed. Stopping it immediately after intense use of high speed and speed can damage the engine.
PROCEDURE
Press
and
NOTE:
If the outboard is equipped with a stop by a rope, it can also be switched off by pulling it
out and removing the catch present.
Securely tighten the fuel tank breather valve and close the fuel.
hold
the
outboard
stop
button
until
it
is
completely
off.
19