Operating Instructions - KOBE CH-122 Serie Instrucciones De Instalación Y Manual De Operación

OPERATING INSTRUCTIONS

This KOBE hood is equipped with four electronic controls with a 10-second standby startup & 30-
second delay shutoff, two powerful centrifugal turbine impellers with safety screens, two bright 12-volt
20-watt halogen lights, and four oil containers.
The four electronic controls are Light Control, Speed Control A (cycles through Low, Medium, High,
QuietMode™), Speed Control B (cycles through Low, QuietMode™, High, Medium) and the Power
Control (On/Off). Refer to Figure 32.
Light
Control
(Cycles through Low, Medium, High,
Q i tM d )
Turn On:
-
Press Power Control (On/Off) button once. (If any Control button is not pressed within 10
seconds, power will be automatically turned off).
-
The KOBE hood will start on Low speed. Each press of the Speed Control button will cycle
through the various speeds.
-
Press Speed Control A button to cycle from Low, Medium, High, or QuietMode™. Press
Speed Control B button to cycle from Low, QuietMode™, High or Medium.
-
Press Light Control button to turn halogen light on.
Turn Off:
-
Press Power Control (On/Off) button once, panel lights will flash and power will be
completely shut off after 30 seconds.
OR
-
Press Power Control (On/Off) button twice, all power will be shut off immediately.
-
If only the lights are on, pressing Power Control (On/Off) button once will turn power off after
30 seconds.
Speed Control A Speed Control B
(Cycles through Low, QuietMode™, High,
Medium)
18
Figure 32
Power Control