Placing Tool In Service - Facom DF.17 Guía De Instrucciones

FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
WARNING
Always wear eye protection when operating or
performing maintenance on this tool.
WARNING
Air powered tools can vibrate in use. Vibration,
repetitive motions or uncomfortable positions may be
harmful to your hands and arms. Stop using any tool if
discomfort, tingling feeling or pain occurs.
Seek medical advice before resuming use.
WARNING
Always turn off the air supply and disconnect the air
supply hose before installing, removing or adjusting
any accessory on this tool, or before performing any
maintenance on this tool.
LUBRICATION
FACOM NS.557-04
Always use an in-line lubricator with these tools. We recommend the use of a
FACOM N.558D fi lter-regulator-lubricator. If a lubricator is not used inject
1 1/2 CM3 into the air connector every 8 operating hours. FACOM recom-
mends NS.557-04 lubricating oil.
NU-DF.17_1006.indd 6 NU-DF.17_1006.indd 6
WARNING
WARNING LABEL IDENTIFICATION

PLACING TOOL IN SERVICE

WARNING
Always wear hearing protection when operating
this tool.
WARNING
Do not carry the tool by the hose.
WARNING
Keep body stance balanced and fi rm. Do not overreach
when operating this tool.
WARNING
Operate at 90 psig (6.2 bar/ 620 kPa) Maximum air
pressure.
WARNING
Do not use damaged, frayed or deteriorated air hoses
and fi ttings.
06/04/2007 16:44:19 06/04/2007 16:44:19