Assembling Your Kickscooter; First Ride - Segway Ninebot KickScooter Max G30P Manual Del Usuario

4 Assembling Your KickScooter

1. Unfold the handlebar stem and fasten
it. Then unfold the kickstand to
support the KickScooter.
1
2
3. Install six screws (two on each side)
with the included hex wrench.
06
2. Firmly connect the wires inside the
handle and the stem. Slide the handle
onto the stem. Be aware of the correct
orientation.
Headlight
toward front
4. Verify that your KickScooter can be
powered on and off.

5 First Ride

There are safety risks when learning to ride the KickScooter. You must read the
Riding Safety via the App before your first ride.
For your safety, your new KickScooter is not activated and will beep occasionally after
Power ON.
Until activated, the KickScooter maintains very low riding speed, and cannot be ridden
with full function. Install the App on your mobile device (with Bluetooth 4.0 or above),
connect to the KickScooter with Bluetooth, and follow the App instructions to activate
your KickScooter and enjoy the full performance.
Segway-Ninebot App Scan the QR code to download the App.
Install the App and register/login.
1
Click "Vehicle"→"Scan for Vehicle" to connect to
3
your KickScooter.
The KickScooter will beep when the connection
is successful. The Bluetooth icon will stop
blinking and remain illuminated.
Follow the App instructions to active the KickScooter and learn how to ride safely.
4
You can now start to use your KickScooter, check the status with App, and interact with other
users. Have fun!
Power on the KickScooter. A blinking
2
Bluetooth icon indicates the KickScooter is
waiting for a connection.
Vehicle Fans Moments Discover Me
07