SPORTSTECH KS260 Manual De Usuario página 20

Step 7
To secure the position of the device, slide the red locking mechanism on both ends
of the pull-up bar along the groove in the middle and snap it into place. If one of the
two locking mechanisms does not engage directly, move the red lock with one hand
and the corresponding grip with the other hand until both lock tightly into one another
(to release the locking mechanism, reverse the sequence of steps). After successful
locking, the rods are fully prevented from rotating.
Step 8
After installation, check the overall stability of the assembly by carefully testing the
device with your full weight before starting your exercises.
Optional
You can also permanently attach your device with the enclosed brackets. To do
so, mark two opposing points on the doorframe at the appropriate height level.
Attach the brackets using a crosshead screwdriver. Then you can hang the device
into the brackets that you just fixed.
20