Husqvarna R 318X Manual De Usuario página 19

1. PREPARE THE PRODUCT
Lubricate the pedals on the inner side of the frame tunnel.
Lubricate the belt tensioner.
Remove the drive wheels and grease the axels.
2. ENGINE
Do a check of the fuel hose. Replace if it is necessary.
Replace the fuel filter. Refer to
Replace the air filter. Refer to
Do an inspection of the cooling fins on the hydrostatic transmission.
Clean the engine and the hydrostatic transmission.
Do a check of the muffler and the heat deflector.
Replace the engine oil. Refer to
page 28 .
Replace the engine oil filter. Refer to
on page 28 .
Replace the spark plug. Refer to
23 .
Do a check on the lights (if applicable).
Update the firmware (if applicable).
Do a check of the battery and charge if it is necessary.
3. TRANSMISSION, CONTROLS AND DRIVE SYSTEM
Do an inspection of and adjust the front and rear wheel rotation speed (only
AWD).
Replace the transmission filter (only AWD).
Replace the spin on filter for the servo (if applicable).
Do a check of the cooling fan on the hydrostatic transmission.
838 - 007 - 03.11.2021
To replace the fuel filter on page 22 .
To clean and change the air filter on page 22 .
To change the engine oil and the oil filter on
To change the engine oil and the oil filter
To examine and replace a spark plug on page
First Maintenance interval
servicing in hours
50 100
O
O
O
First Maintenance interval
servicing in hours
50 100
O
O
Clean O
O
O
O O
100
hours or
O one (TN)
time each
year
O O
O
O O
O O
O O
First Maintenance interval
servicing in hours
50 100
O O
O
O
O O
200
200
200
O
O
19