Note:
Other symbols/decals on the product refer to
certification requirements for some commercial areas.
Euro V Emissions
WARNING:
voids the EU type-approval of this product.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING:
hands and feet and throw objects. Serious
injury or death may occur if you do not obey
the safety instructions.
WARNING:
product with damaged cutting equipment.
Damaged cutting equipment can throw
objects and cause serious injury or death.
Replace damaged blades immediately.
WARNING:
electromagnetic field during operation. This
field may under some circumstances
interfere with active or passive medical
implants. To reduce the risk of serious or
fatal injury we recommend persons with
medical implants to consult their physician
8
Tampering with the engine
Used if there is a risk of
Used if there is a risk of
This product can cut off
Do not continue to use a
This product produces an
•
the product is incorrectly repaired.
•
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
•
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
•
the product is not repaired at an approved service
center or by an approved authority.
Safety
and the medical implant manufacturer
before operating this product.
WARNING:
instructions that follow before you use the
product.
•
Always be careful and use your common sense.
Avoid all situations which you consider to be beyond
your capability. If you feel uncertainty about the
operating procedures after you read the operator's
manual, consult an expert before you continue.
•
Read and understand the operator's manual and the
instructions on the product carefully before you start
the product.
•
Learn how to use the product and its controls safely
and learn how to stop the product quickly.
•
Learn to recognize the safety decals.
•
Keep the product clean to make sure that you can
clearly read signs and stickers.
•
Keep in mind that the operator will be held
responsible for accidents that involve other persons
or their property.
•
Do not transport passengers. The product must only
be used by one person.
•
Do not let the product stay unsupervised with the
engine on. Always stop the blades, apply the parking
Read the warning
838 - 007 - 03.11.2021