Husqvarna R 318X Manual De Usuario página 34

Ocultar thumbs Ver también para R 318X:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Change the engine oil, and discard the waste oil.
Empty the fuel tank. Start the engine and run it until
there is no remaining fuel in the carburetor.
Note:
Do not empty the fuel tank and carburetor if
a stabilizer has been added.
Remove the plugs and put about a tablespoon of
engine oil into each cylinder. Manually turn the
engine shaft to apply the oil and put the plugs back
on.
Lubricate all grease nipples, joints and axles.
Keep the product in a clean and dry area and cover
it for more protection.
A cover for protection of your product during storage
or transport is available at your dealer.
Disposal
Chemicals can be dangerous and must not be
discarded on the ground. Always discard used
chemicals at a service center or an applicable
disposal location.
When the product is worn out, send it to the dealer
or to an applicable recycling location.
Oil, oil filters, fuel and the battery can have negative
effects on the environment. Obey the local recycling
requirements and applicable regulations.
Do not discard the battery as domestic waste.
Send the battery to a Husqvarna service agent or
discard it at a disposal location for used batteries.
34
838 - 007 - 03.11.2021

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

R 320x awd

Tabla de contenido