Descargar Imprimir esta página

Publicidad

Enlaces rápidos

LCSP-RS-EH
SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS
- Technology: Keypad and proximity (125 kHz)
- PIN Code length: 4 to 8 digits (with/without fixed length)
- Read range: up to 7 cm
- Output: RS485
- LED, TAMPER AND BUZZER managed by the host
- Reads EM or HID cards (selectable from software)
- Operates on 9 - 14 VDC, 40mA
- IP65
- Compatibility: WS4 access controller
- Distance reader to controller: 80 meters
- Tecnologia: tastierino e prossimità (125 kHz)
- Lunghezza codice PIN: da 4 a 8 cifre (con/senza lung. fissa)
- Campo di lettura: fino a 7 cm
- Uscita: RS485
- LED, funzioni manomissione e segnale acustico gestiti dall'host
- Lettura schede EM o HID (selezionabili dal software)
- Alimentazione 9 - 14 VCC, 40 mA
- IP65
- Compatibilità: controller accessi WS4
- Distanza tra lettore e controller: 80 metri
- Technologie: Tastatur und RFID (125 kHz)
- PIN-Code-Länge: 4 bis 8 Ziffern (mit/ohne vorgegebener
Länge)
- Leseentfernung: bis 7 cm
- Ausgang: RS485
- LED-, Sabotageschutz- und Summerkonfiguration über Host
- Liest EM- oder HID-Karten (wählbar über Software)
- Spannungsversorgung: 9 - 14 VDC, 40 mA
- IP 65
- Kompatibilität: WS4-Zutrittscontroller
- Abstand zwischen Leser und Controller: 80 m
MOUNTING/ MONTAGE/ INSTALLAZIONE/ MONTAJE/ MONTAGE/ MONTAGE
1.
2.
43B
Cable
Ø6.0
5.
3 (4 x 30 CSK)
RS485 Keypad with integrated proximity reader
USER'S MANUAL
3.
Cable
Ø6.0
5 mm
6.
7.
EN FR IT ES DE NL
- Technologie : clavier et proximité (125 kHz)
- Longueur de code PIN : 4 à 8 chiffres (avec/sans longueur fixe)
- Portée de lecture : jusqu'à 7 cm
- Sortie : RS485
- LED, anti-sabotage et avertisseur sonore gérés par l'hôte
- Lecture de cartes EM ou HID (à sélectionner dans le logiciel)
- Fonctionnement sur 9 - 14 VDC, 40 mA
- IP65
- Compatibilité : contrôleur d'accès WS4
- Distance entre lecteur et contrôleur : 80 mètres
- Tecnología: teclado y proximidad (125 kHz)
-
Longitud del código PIN: de 4 a 8 dígitos (con/sin longitud fija)
- Rango de lectura: hasta 7 cm
- Salida: RS485
- LED, control manual y timbre gestionados por el host
- Lee tarjetas EM o HID (seleccionables desde el software)
- Funciona con 9 - 14 V CC, 40 mA
- IP65
- Compatibilidad: controlador de acceso WS4
- Distancia del lector al controlador: 80 metros
- Technologie: Toetsenbord en nabijheidslezer (125 kHz)
- Lengte pincode: 4 tot 8 tekens (met/zonder vaste lengte)
- Leesbereik: tot 7 cm
- Uitgang: RS485
- LED, sabotageschakelaar (tamper) en zoemer aangestuurd
door de host
- Leest EM- of HID-kaarten (selecteerbaar uit software)
- Werkt op 9 - 14 VDC, 40 mA
- IP65
- Compatibiliteit: WS4 toegangscontroller
- Afstand tussen lezer en controller: 80 meter
4.
8.
2 (M3 x 6mm)
Ferrite Core
Bus for
the readers
A
B
Wrap the wires around the ferrite core (1 turn).
The ferrite core is provided with the kit and it is
used to reduce the EMI.
Reader
1

Publicidad

loading

Resumen de contenidos para XPR Access LCSP-RS-EH

  • Página 1 LCSP-RS-EH EN FR IT ES DE NL RS485 Keypad with integrated proximity reader USER’S MANUAL SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS - Technology: Keypad and proximity (125 kHz) - Technologie : clavier et proximité (125 kHz) - Longueur de code PIN : 4 à 8 chiffres (avec/sans longueur fixe) - PIN Code length: 4 to 8 digits (with/without fixed length) - Portée de lecture : jusqu’à...
  • Página 2 5 mm 3 (4 x 30mm CSK) 2 (M3 x 6mm) 103A 103B 103G Cable Ø6.0 3 (4 x 30mm CSK) 4 (M3 x 6mm) Wiring / Câblage / Cablaggio / Cableado/ Verdrahtung/ Aansluiting 9-14 VDC 12V/24V Jumper for reader’s address AC/DC A - RS485 Cavalier pour adresse de lecteur...
  • Página 3 The readers for Doors 1.0 and 2.0 must be at address 0 and those for Doors 1.1 and 2.1 at address 1. For doors equipped with 2 readers, one must be at address 0 and the other at address 1. Recommended cabling: Multiconductor cable 2 twisted pair with shielding.
  • Página 4 Software settings/ Paramètres du logiciel/ Impostazioni software/ Ajustes de software/ Softwareeinstellungen/ Software-instellingen fig. 1 fig. 2 fig. 3 fig. 4 Go to Doors, select the Reader(fig.2) and then select 125 kHz(EM4100) or 125 kHZ(HID) for Card and mark the checkbox for Keypad. (fig.3) While off...