Assembly - A-iPower PWE2000 Manual Del Propietario E Instrucciones De Operación

SETUP

ASSEMBLY:

1. Insert the axle through the frame
assembly, wheels, gaskets and nuts in turn,
then tighten the nut to fix them by a wrench.
Figure A.
2. Fix the cord wrap assembly to the handle
tube assembly by using an Allen key to
tighten the hex nut. See Figure B.
FOR TECHNICAL QUESTIONS, PLEASE CALL 1-855-888-3598
3. Insert the handle tube assembly to the
frame assembly to put them together. See
Figure C.
Figure A
Figure B
4. Fix the gun holder assemby to the handle
tube assembly by tightening the butterfly nut
manually. See Figure D.
10
Figure C
Figure D