Maintenance; Cleaning Pressure Washer - A-iPower PWE2000 Manual Del Propietario E Instrucciones De Operación

MAINTENANCE

NOTICE: Regular maintenance will improve the performance and extend the life of your
Pressure Washer's warranty does not cover items that have been subjected to operator
abuse or negligence. Only by maintaining Pressure Washer in accordance with instructions
in this manual will the full value of the warranty be honored.
Pump Maintenance
NOTICE: The pressure pump is
maintenance free. If you notice any sign of
oil leakage in and around the pump, DO
NOT operate the pressure washer. Please
call our Customer Service at 1-855-888-
3598.
Cleaning Nozzle:
Occasionally, the spray wand can become
clogged with foreign materials such as dirt.
When this happens, excessive pressure
can develop. Whenever the pressure
nozzle becomes particularly clogged, the
pump pressure will pulsate. It should be
immediately cleaned.
1.
spray gun is locked.
2. Remove high pressure spray nozzle
from the spray wand. Using the nozzle
cleaning needle (provided), remove any
obstructions by inserting and carefully
moving the pin back-and-forth through
nozzle hole under clean running water.
3. After cleaning, remove the needle from
nozzle and store for future use.
4. Reassemble pressure nozzle to spray
wand.
Cleaning Water Inlet Screen Filter:
The pump water inlet has
be checked periodically
and cleaned if necessary.
FOR TECHNICAL QUESTIONS, PLEASE CALL 1-855-888-3598
• Disconnect inlet water hose.
•
straight out.
•
with water.
•
port.
NOTICE: Do not operate Pressure Washer
Impurities entering pressure pump can
cause internal damage.

Cleaning Pressure Washer

Daily or before each use inspections should
include areas around and underneath
Pressure Washer looking for signs of water
or oil leaks. Preventative maintenance
should be taken if leakage is found.
Inspect cooling air slots and openings on
Pressure Washer housing. Openings must
be kept clean and unobstructed for peak
performance of Pressure Washer.
• Use a damp cloth to wipe exterior
surfaces clean.
• Use a soft bristle brush to loosen caked
on dirt.
• Use a shop-vacuum to pick up any loose
dirt and debris.
17