Tabla de contenido
Publicidad
7. Restart the computer.
If the device icon is still not present, check cable connections, device jumper
settings, and resolve any existing conflicts.
The CD cannot be read.
Take the following actions:
1. The CD might be dirty; clean it as described in "Handling and caring for a
CD" on page 1-9.
2.
The CD might be defective; try another CD.
3.
The CD is not ISO-9660- or High Sierra Group-compatible. Check with
your place of purchase.
There is no sound from the CD.
Take the following actions:
1. Check that you are using an audio CD and not a data CD.
2. Adjust the sound-adapter volume control. See the documentation that
comes with your sound adapter and audio-CD player program.
3. Turn off the computer, unplug the cables from the electrical outlets for your
computer and all attached devices, and remove the computer cover. Check
that the audio-signal cable connects the 8x4x24 Slimline drive to the sound
adapter.
Your screen displays an error message.
Take the following actions for two common error messages.
v CDR-101
– This message displays when you try to access the Slimline drive before
the drive is ready. The busy indicator lights when you attempt to access
the drive after loading a CD into the CD tray. Wait until the busy
indicator goes off before attempting to read the drive.
v CDR-103
– The CD in the Slimline drive is not a High Sierra Group- or ISO
9660-compatible format. The Slimline drive does not support this format.
You get "buffer underrun" error messages when copying
CDs or making data CDs.
Take the following actions:
v If the file source is a network or removable device, copy the files to the local
hard disk first.
v If using CD copier, select Advanced and check the Copy to Hard Disk
option.
B-4
8x4x24 Slimline CD-RW Drive: User's Guide
Publicidad
Tabla de contenido
