Grammer PRIMO XL Plus Manual De Instrucciones página 23

Cable assignment of the connector plug
Attention:
Absolutely observe correct polarity when connecting the wires of the seat connecting cable!
Power supply red: positive 12 V
black: negative
Before installation, check the fuse protection of the seat and compare it with the technical
data of the vehicle.
Note:
When doing the connection to the fuse box, make sure that the fuse of the selected electric
circuit does not exceed the amperage prescribed for the seat and the cable harness.
Assignment of the connector plug at the seat:
Cable colours:
1 > yellow
2 > green
3 > gray
4 > orange
5 > Brown
6 > blue
* if fitted ** depending on model
GB
Cable assignments:
1 - 3 > make contact seat occupancy detection system
1 - 2 > break contact seat occupancy detection system
1 - 6 > belt buckle switch *
4 - 5 > seat heater / compressor
*** optional extra
Connecting data
6
1
5
2
3
4
X
23