Audio Adjustment
Selecting the Equalizer Curve
You can switch between Equalizer curves.
• Rotate the EQ selector up or down to select the desired Equalizer curve.
POWERFUL + = NATURAL + = VOCAL + = CUSTOM + = FLAT + = SUPER BASS
Note:
• "CUSTOM" stores an equalizer curve you have made adjustments to. (Refer to "Equalizer Curve
Adjustment" on page 44 and "Equalizer Curve Fine Adjustment" on page 45.)
• You can create different "CUSTOM" curves for different sources.
• When "CUSTOM" is selected, the displayed curve and name switches to that selected before
adjustments were made (refer to pages 44 to 45) and "CUSTOM" is also displayed.
Initially, "FLAT" and "CUSTOM" appear on the display.
Entering the Audio Menu
With this menu, you can adjust the sound quality.
Note:
• After entering the Audio Menu, if you do not perform an operation within about 30 seconds, the
Audio Menu is automatically canceled.
• Audio Menu functions change depending on the Rear Speaker Output and Subwoofer Controller
setting in the Initial Setting Menu. (Refer to "Switching the Rear Speaker Output" and "Setting the
Subwoofer Control" on page 56.)
1. Select the desired mode in the Audio Menu.
Each press changes the Mode ...
2. Operate a mode.
3. Cancel the Audio Menu.
43
All manuals and user guides at all-guides.com
"CUSTOM"