Cub Cadet 769-21273A Manual Del Usuario página 11

Safety information
Power tool use and care
Do not force the power tool. Use the correct
power tool for your application.
Do not use the power tool if the switch does
Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any ad-
justments, changing accessories, or storing
power tools.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
damaged, have the power tool repaired before
use.
Keep cutting tools sharp and clean.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Safety information
Battery tool use and care
the manufacturer.
nated battery packs.
When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
If liquid contacts eyes, additionally seek medi-
cal help.
Do not use a battery pack or tool that is dam-
or excessive temperature.
Follow all charging instructions and do not
charge the battery pack or tool outside the
tions.
Service
repair person using only identical replace-
ment parts.
Never service damaged power packs.
Follow all the instructions on charging the
power pack in this operating manual and in
the separate operating manual of the charger.
For reasons of safety, removal and disposal
of the LI-ION power pack may only be per-
formed by a service centre.
EN
-
-
11