Dräger UCF 6000 Instrucciones De Uso página 42

Use
3.2.5 Attaching the crawling plate to the camera (optional)
The thermal imaging camera always includes the crawling plate. It can
be used with or without crawling plate. Mount the crawling plate to the
handle as follows:
Insert the camera handle into the crawling plate, and screw it into

the tripod mount.
NOTICE
i
i
If the camera with crawling plate is to be mounted to a tripod,
screw the tripod to the crawling plate.
3.2.6 Attaching the crawling plate in the charging cradle
(optional)
If the camera is used without the crawling plate, the crawling plate
should be stored in the charging cradle as a mechanical adapter:
1. Remove the tripod screw from the crawling plate.
2. Push the screw through the crawling plate from the top and screw
it to the charging cradle.
42
3.2.7 Attaching the carrying strap (optional)
Hook the hand strap

retractable lanyard to the lug
in the handle (1).
or
Hook the neck strap to both

lugs on the side of the camera
(2).
Dräger UCF 6000, UCF 7000, UCF 8000, UCF 9000
or
1
2
01721807.eps