Danby one PLUG 2.6SM4R Manual Del Propietário página 5

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the hinge cover and the upper hinge.
Remove the hinge hole covers from the top right
side of the cabinet. Remove the door from the
cabinet.
2. Remove the hinge hole cover from the top right
side of the door and place it in the hinge hole on
the top left side of the door.
3. Remove the adjustable foot from the bottom right
side of the cabinet and remove the solid foot
and lower hinge from the bottom left side of the
cabinet. Install the lower hinge and solid foot on
the bottom right side of the cabinet and install
the adjustable foot on the bottom left side of the
cabinet.
4. Place the door on the cabinet and install the
upper hinge on the top right side of the cabinet.
Before tightening the screws in the upper hinge,
ensure that the top of the door is level with the
top of the cabinet and that the rubber gasket is
making a good seal with the cabinet all the way
around. Install the hinge cover over the hinge
and install the hinge hole covers in the screw
holes on the top left side of the cabinet.
1
2
4
4
3