Groeneveld Greensight Manual Instrucciones De Uso página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
Top corner detection (optional)
Top corner detection extends the detection zone. By mounting two extra
ultrasonic sensors onto the top of the vehicle, higher obstacles such as signs,
half-open roller doors and branches of trees can be detected.
Sensors for side detection (optional)
To help prevent damage during complex vehicle manoeuvres, Greensight is also
available with sensors for side detection. These sensors detect objects
alongside the vehicle during reversing around corners. Depending on the wishes
of the customer, the side sensors can be automatically deactivated above a
certain preset speed.
Alarm horn (optional)
The alarm horn sounds when an object is within the detection zone and is meant
to alert people to the reversing vehicles presence. The sound level of the alarm
horn automatically adjusts to the sound level of its environment.
Extra camera (optional)
The use of an extra camera can be a handy option. One use of this camera is for
blind side corner detection at the front of the vehicle. When turning towards the
passenger side, the camera brings into view the entire blind side of the vehicle
and any obstacles that may be present.
Signal supply function
Greensight can be optionally be extended with the "signal supply" function,
which supplies a signal as soon as an object is detected in the detection zone
directly behind the vehicle (zone 3). The "signal supply" function enables an
extra accessory to be powered, such as an extra horn or warning lamp.
Self-test
Transportation application
When reverse gear is selected, the system will perform a self-test to verify
correct operation of the Greensight. After 1 second, the system is ready for use.
Industrial application (forklift trucks, wheel loaders, etc.)
When the engine is started, the system will self-test to verify correct operation of
the Greensight. After 1 second, the system is ready for use. When reverse gear
is selected, the system will self-test the sensors only. After half a second, the
system is ready for use.
XU1809P02
5

Publicidad

Tabla de contenido
loading

Productos relacionados para Groeneveld Greensight

Este manual también es adecuado para:

Xu1809p02F121807

Tabla de contenido