SOUNDMASTER RCD1185 Manual Del Usuario página 10

1. Press the PROG button, the LCD display will show ' 01 ' and "PROG" flash continuously.
2. Press the or
3. Press the PROG button again to store this track in memory, the LCD will show ' 02 ' and
flash continuously.
4. Repeat steps from 2 to 3 to store more tracks in memory. You can store up to 20 tracks in
the memory.
5. Press the button to play the disc in the programmed order.
6. To stop playing, press the STOP
7. To cancel the programming list, press the STOP
FUNCTION switch to OFF position.
Repeat Mode
Repeat 1: Press the REPEAT button once, the REP indicator will flash on the LCD display. This
single track will be repeated.
Play complete folder (only with MP3-CD!): Press the REPEAT button again. The display will
show REP ALBUM. The complete folder will be repeated.
Repeat All: Press the REPEAT button again, the REP ALL indicator will show on LCD display.
The whole disc will be played continuously.
Random play: Press the REPEAT button again, the display will show RAND. The tracks of the
CD are played in a random order.
To Cancel Repeat Function: Press the REPEAT button until all indicator turned off.
CD resume function
RESUME – continuing from where you have stopped
1. Set the FUNCTION switch to RESUME position.
2. To start playing the CD, press the
3. Press STOP
4. Press to resume playback.
5. Playback continues from where you have stopped.
To deactivate RESUME, set the function switch to "CD.MP3", "FM" or "OFF".
Note:
Opening the CD door during playback, RESUME function is also activated.
Important Note
Automatic standby switching
To comply with the ERP2 directive, the unit automatically switches to standby after approximately
10 minutes without a signal. To switch the unit on again, press the
If the button is pressed continuously for 5 seconds, the unit switches to standby mode. To
switch the unit on again, press the
buttons to select the desired track.
in once whenever you want to stop playback.
button on the unit.
button.
button and open the CD door or set the
button.
3
RCD1185 / English Instruction Manual
button on the unit.