PANCONTROL PAN LAN1 Manual página 36

If any other value is displayed, the device needs to be checked.
Changing the fuse(s)
Attention: To avoid electric shock remove test leads before opening the
cover!
1. Remove test leads from any power source and turn the device OFF before
opening the cover!
2. Remove the protective cover and the screws of the battery or fuse
compartment using a proper screwdriver and remove the lid.
3. Remove the broken fuse carefully from ist holder.
4. Reinset the new fuse and ensure proper fitting.
5. Replace the cover and secure the screw.
Cleaning
If the instrument is dirty after daily usage, it is advised to clean it by using a
humid cloth and a mild household detergent. Prior to cleaning, ensure that
instrument is switched off and disconnected from external voltage supply and
any other instruments connected. Never use acid detergents or dissolvent for
cleaning.
EN 16